产品概述
NSE系列高速板链斗式提升机是一种垂直提升设备。这类产品被广泛用于提升粉状和小颗粒状物料。
NSE系列高速板链斗式提升机共有九种基本型号：NSE100、NSE200、NSE300、NSE400、NSE500、NSE600、NSE700、NSE800、NSE1000，每种型号根据输送物料的不同，选择不同的提升速度，提升速度≤70m/min，提升高度65m。另外，九游会旗舰厅公司还可根据用户要求输送量介于上述型号之间的扩展型号。
I. Brief description
NSE high-speed plate chain bucket elevator is a new type of vertical lifting equipment developed by CMHE after CMHE absorbing the foreign advanced technology. In each industrial country, this kind of product is widely used for lifting powdery and granular materials.
NSE high-speed plate chain bucket elevator has 9 models: NSE 100, NSE200, NSE300, NSE400, NSE500, NSE600, NSE700, NSE800 and NSE1000. Each model has different lifting speed according to different materials to be conveyed. The maximum lifting speed should be 彡 70m/min, and the maximum lifting height is 65m. Besides, CMHE can provide other models according to clients' requirements.

产品特点

型号说明

结构
NSE板链式提升机由运行部件、驱动装置、上部装置、中部机壳、下部装置组成。
运行部件一一由料斗和套简滚子链组成。
驱动装置一一由驱动平台、驱动组合、传动链组成。驱动组合分为两种：①链传动：通常由ZSY硬齿面减速机（或JZQ减速机）、YOX液力偶合器、Y系列电机、XWD减速机、电磁离合器（或手动离合器）组成；②直联：采用直交轴硬齿面减速机与提升机主轴直联，Y系列电机与减速机之间采用偶合器（联轴器）联接。
驱动装置分左装和右装两种。分别与提升机左、右装对应。
左装：为人面对进料口，驱动装置组合在左侧。
右装：为人面对进料口，驱动装置组合在右侧。
上部装置——有上部机壳、上罩、卸料口（装有防回料板）、头轴装配、逆止器等部件。
中部机壳——分为与上部装置联接的带支撑中间节、带检视门中间节、标准中间节（均为3.0米高）和非标准中间节。
下部装置——包括下部机壳、进料口、尾轴装配、张紧装置，并有旋转探测仪、料位开关供选配。
III. Structure
NSE plate chain elevator is comprised of running parts, drive, upper device, middle casing and lower device.
Running parts composed of buckets and bush roller chain.
Drive——composed of drive platform, drive assembly and transmission chain. The drive assembly has two kinds:①chain drive: often comprised of ZSY hard-toothed surface reducer (or JZQ reducer), YOX fluid coupling, Y-series motor, XWD reducer, and electromagnetic clutch (or manual clutch); ©direct drive: connect the reducer of rectangular axis and hard-toothed surface to the elevator shaft, and use coupling to link Y-series motor and reducer.
The drive is mounted on the left or on the right, which corresponds to the left-type or the right-type elevator. Left: When the operator faces the charge inlet, the drive assembly is on the left side.
Right: When the operator faces the charge inlet, the drive assembly is on the right side.
Upper device——includes parts of upper casing, top cover, discharge outlet (with anti back feed plate), head shaft and backstop.
Middle casing——middle section with brackets which is connected to the upper device, middle section with a inspection door, standard middle section (all are 3.0 meters tall) and non-standard middle section.
Lower device~lower casing, charger inlet, tail shaft assembly, tensioner, and with optional rotary detector and level switch.

选型参数
NSE50-NSE1000型提升机的常用提升量、提升高度分别见表1-10。

订货须知
用户在订货时请提供下列数据